EIFS Preparations for Rough Openings Specification

EIFS Preparations for Rough Openings Specification

A complete overview of EIFS Preparations for Rough Openings Specification

 

In this post we are going to take a look at EIFS Preparations for Rough Openings Specification. Rough openings are normally thought of as door and  windows openings, but what also falls into this spec are expansion joints and the top of parapet walls. Dryvit’s Aqua Flash is applied to the jam. Read more EIFS Preparations for Rough Openings Specification

EIFS Sign Attachment Specification

EIFS Sign Attachment Specification

An overview of the EIFS Sign Attachment Specification

In this post we will take a look at the EIFS Sign Attachment Specification. It is not to often an EIFS guy will be there for the sign install, but I had to post this specification as almost every sign area that I am repairing has been installed wrong by the sign company, when it comes to installing over EIFS anyway. Read more EIFS Sign Attachment Specification

EIFS Horizontal Joint- Substrate Change Specification

EIFS Horizontal Joint- Substrate Change Specification

An overview of the EIFS Horizontal Joint- Substrate Change Specification

In this post we are going to take a look at the EIFS Horizontal Joint- Substrate Change Specification. In the field doing repairs we see cracking where there was no expansion joint between substrate changes. Read more EIFS Horizontal Joint- Substrate Change Specification

EIFS Inside / Outside Corners Specification

EIFS Inside / Outside Corners Specification

An overview of the EIFS Inside / Outside Corner Specification

In this post we will take a look at the EIFS inside / outside corner specification. The basic process of doing a corner is pretty much the same as a flat wall with a couple exceptions. Read more EIFS Inside / Outside Corners Specification