Welcome to The EIFS Tip Of The Day
from EIFS Repair.
Each day we will cover some aspect of the EIFS (exterior insulation and finish system) Industry. Each week we will stay focused on a specific topic. You will be able to scroll through the topics and view all the tips of the day from past to present.
In our first week of ’ EIFS Tip Of The Day ‘ from EIFS Repair we will be focusing on ‘The Finish Coat’, and some of the things that are over looked, and a few of the basics as well.
Week 1 – The EIFS finish coat
Floating the finish coat 3-3-2011
Boxing off your Finish 3-4-2011
Consistency of the Finish 3-5-2011
How to float 3-6-2011
Week 2 – Things you should have on the job site - EIFS Tip Of The Day
Every plasterer should have some key things with them when they are on the job site. When you are doing EIFS there are a special set of tools most other trades would not carry with them, as it is, with most trades. This week will will focus on some of those things.
Job Site Change Orders 3-7-2011
A tool every EIFS guy should have 3-8-2011
A good plasterer has a Curry 3-9-2011
Cutting EPS Foam 3-10-2011
Keeping your tools clean 3-11-2011
Week 3 – Working with EPS Foam -EIFS Tip Of The Day
This week we are going to be talking about EPS Foam. From what EPS Foam and we use it in the EIFS Industry to how it is applied.
Expanded Polystyrene (EPS) Foam 3-14-2011
Rasping the EPS Foam 3-15-2011
Expanded polystyrene (EPS) Foam Shapes 3-17-2011
Week 4- Repairing EIFS -EIFS Tip Of The Day
In week four of EIFS Repair ‘Tip Of The Day’ we are going to focus on the art of repairing EIFS. We will be giving you some of our very best tips in this week, so it will be a real must see.
Repairing EIFS – How to Repair EIFS 3-20-2011
Getting an EIFS patch to look right – How to repair EIFS 3-22-2011
How to match the color for an EIFS repair – 3-22-2011
Before you begin your EIFS Repair – 01-23-2012
Week 5 -Designing your EIFS project - EIFS Tip Of The Day
There are a lot of things to consider when designing your EIFS project. The possibilities with Exterior Insulation and Finish System (EIFS) is virtually endless. That is one of the main reasons EIFS is so popular.
Using simple EIFS practices to create dynamic effects
EIFS Tip Of The Day - EIFS Repair | Exterior Insulation and Finish System | Synthetic Stucco

Pingback: EIFS Repair - How to float the finish | Exterior Insulation and Finish System |
Pingback: EIFS Repair Job Site Change Orders | Exterior Insulation and Finish System |
Pingback: A tool every EIFS guy should have | Exterior Insulation and Finish System |
Pingback: A good plasterer will use a Curry Trowel | EIFS |
Pingback: EIFS foam cutting | Hot Knife / Groover | Exterior Insulation and Finish System |
Pingback: EIFS - Floating the Finish Coat |Exterior Insulation and Finish System |
Pingback: EIFS Repair - Tip Of The Day - stucco |
Pingback: EIFS | Consistency of the Finish |
Pingback: EIFS | keeping your tools clean |
Pingback: Expanded polystyrene (EPS) | EIFS |
Pingback: Rasping EIFS expanded polystyrene EPS Foam |
Pingback: Expanded polystyrene (EPS) Foam Shapes | EIFS |
Pingback: Repairing EIFS | Exterior Insulation and Finish System |
Pingback: Getting an EIFS patch to look right (Exterior Insulation and Finish System) |
Pingback: How to match the color for an EIFS repair |
Pingback: Using simple EIFS practices to create dynamic effects |
Pingback: EIFS Finish Textures |
Pingback: EIFS Finish Textures |
Pingback: Before you begin your EIFS Repair |
Pingback: Air and Water Barrier | EIFS Dryvit |